Address: 275 Lisan Road Liling City, Hunan Province, P.R.CHINA
Zip Code: 412200
Tel: 0086-0731-23369587
Mobile: 0086 13787818664
Email:kim@sixstarhardmetal.com
Website:www.sixstarhardmetal.com
Carbide Conical Buttons
Carbide Conical Buttons SZ1420X-G10Q etc
Product feature:
Six Star Hardmetal carbide button have good wear-resistant and a longer service life.
1. drill bits have long service life: with the unique proprietary technology,our cemented carbide drill bits strength ≥2800N,hardness(HRA)≥92.
2. drill bit button do not break easily: using high strength chisel tool stell, and strict technology for heating processing, our drill bit button have higher strength.
3. full type, our drill bit can meet the request of mining with different hardness of rock.
Application:
Six Star Hardmetal Tungsten Carbide Buttons are used on hammer, DTH mining bits and roller cone bits for oil well drill, suitable for very hard formation.
Conical buttons
Type | Dimension (mm) | |||||
D | H | θ° | SR | ɑ° | β° | |
SZ0812 | 8.25 | 12.2 | 70 | 3.0 | 20 | 27 |
SZ0913 | 9.25 | 13.3 | 70 | 3.0 | 20 | 26.5 |
SZ0915A | 9.25 | 14.9 | 55 | 3.0 | 20 | 26.5 |
SZ1016 | 10.25 | 16.2 | 70 | 4.0 | 20 | 26.5 |
SZ1016A | 10.25 | 16.2 | 52 | 4.0 | 20 | 26.5 |
SZ1116B | 11.30 | 15.9 | 52 | 4.0 | 20 | 26.5 |
SZ1117C | 11.30 | 17.4 | 60 | 4.0 | 20 | 26.5 |
SZ1118A | 11.30 | 18.0 | 55 | 4.0 | 20 | 26.5 |
SZ1218A | 12.35 | 17.9 | 55 | 4.8 | 20 | 28 |
SZ1218B | 12.35 | 18.0 | 55 | 4.0 | 20 | 27 |
SZ1219 | 12.35 | 18.9 | 70 | 4.8 | 20 | 28 |
SZ1422A | 14.35 | 21.9 | 55 | 5.0 | 20 | 14.5 |
SZ1424 | 14.35 | 23.9 | 67 | 3.0 | 20 | 15.5 |
SZ1420C | 14.35 | 20.0 | 71.5 | 5.0 | 30 | 15.5 |
Type | Dimension (mm) | |||||
D | H | θ° | SR | e | ɑ° | |
SZ1420X-G10Q | 14.35 | 20.1 | 52 | 5.0 | 1.0 | 45 |
SZ1825A-E12Q | 18.23 | 25.0 | 55 | 6.0 | 1.2 | 20 |
SZ1926B-E21Q | 19.35 | 26.0 | 42 | 7.5 | 2.1 | 18 |
Type | Dimension (mm) | |||||
D | H | θ° | SR | e | ɑ° | |
SZ0711-F2 | 7.25 | 11.0 | 70 | 2.8 | 0.7 | 30 |
SZ0812-E15 | 8.25 | 12.0 | 70 | 3.0 | 1.5 | 18 |
SZ0812-F2 | 8.25 | 12.0 | 70 | 3.0 | 0.7 | 30 |
SZ0914-F2 | 9.25 | 14.0 | 70 | 3.0 | 0.7 | 30 |
SZ1018C-X | 10.25 | 18.0 | 72 | 2.7 | 1.2 | 60 |
SZ1219-F2 | 12.35 | 18.9 | 70 | 4.8 | 0.7 | 30 |
SZ1222X-G10 | 12.35 | 22.0 | 52 | 2.0 | 1.0 | 45 |
SZ1320-F2 | 13.35 | 19.9 | 70 | 4.8 | 0.7 | 30 |
SZ1416B-E20 | 14.35 | 16.0 | 56 | 5.7 | 2.0 | 18 |
SZ1422C-E15 | 14.35 | 22.0 | 71 | 5.0 | 1.5 | 18 |
Standard of tolerances of D and H
Diameter | Height | ||
Nominal size | Tolerance | Nominal size | Tolerance |
≤10 | ±0.10 | ≤11 | ±0.10 |
11 - 18 | ±0.15 | ||
＞10 | ±0.15 | 18 – 25 | ±0.15 |
＞25 | ±0.20 | ||
print
close